- Price: £56,995 ONO
- Factory Date: 1978
- Telephone: 0044 (0) 7491 389483
- City: Crewe
- Country: United Kingdom
- Listed: April 19, 2018 8:01 am
- Expires: 22 days, 23 hours
- Ad id: 372446
This is Road Legal and road tax exempt.
Colin McRae Millington Engine.
A Very special car. Eaton Yale tribute. This is a New Build at massive cost. It was used as a exhibition car around the UK 2017.
Installed is Colin McRae Millington 2.0 Diamond with great history. Fully documented. And Fully refreshed by Milligton.
As you can imagine this car is in beautiful condition being new and having never been raced. It has it’s MSA Passbook and is ready to race if need be. Currently set up for tarmac.
Believe it or not this car is fully road legal and has been driven a few times to motor exhibition. The public are amazed when this drives by. This is the only use the car has had.
I will list the very basic for spec due to the massive list. Contact me for full details.
• 2.01 Millington diamond (257 BHP).
• Millington tapered throttle bodies.
• Millington Dry sump system.
• Fully rose jointed
• Bilstein 300/100 inserts, (front).
• Bilstein coilovers with rose joints, (rear).
• Quaife 5 speed 26z sequential gearbox.
• Standard height gear lever.
• RS2000 Bellhousing.
• AP External mounted clutch slave cylinder.
• Custom gearbox mounts.
• One piece prop shaft.
• AP Calipers & Disc all round.
• Ford bias pedal box with adjuster.
• AP cylinders.
• APCP5219 callipers, (front).
• AP Discs.
• Rix engineering Bells.
• Rix engineering mounts.
• Ferodo DS2500 pads.
• Braided brake lines throughout.
• Wales motorsport WRC alloy hydraulic handbrake.
• Billet APH/H cylinder.
• AP CP2577 callipers with handbrake mechanism.
• AP Discs.
• AP Bells.
• Mintex Pads.
• Harry Hockley Full weld in roll cage.
• Fully seam welded
• Full RS2000 strengthening kit.
• Chassis mounts.
• Gearbox mounts.
• Group 4 strut brace.
• Large Gearbox tunnel.
• large axle tunnel.
• L/H & R/H exhaust tunnels.
• Historic spec 2 piece 4 link boxes.
• 4 link gussets and strengthened 15″ front inner wheel arches.
• Group 4 monte carlo alloy rear arches.
• Group 4 front spoiler & alloy arches
• 3 piece bulkhead strengthener plate.
• Bulkhead to chassis Gussets.
• Top and bottom Rad cut out panel.
• 15″ rear tubs.
• Round turrets.
• Custom firewall.
• Squires Fully floating wide atlas axle.
For many more photos and details please contact me Initially by PHONE ONLY UK 07491 389483
I WILL NOT REPLY TO SMS MESSAGES.
NO TIME WASTERS!
889 total views, 4 today