Ford Sierra Cosworth Gr. A

0x saved 17-11-2026
Price99.000€
Telephone+32 497 37 72 76
CityHUY
CountryBelgium
Listed17-11-2026
Ad Number#736860

Description

Description
– Built over a 4-year period from a real 3-doors Cosworth RS road car (12/1986), with immaculate bodywork.
– For sale with only 600 km of road testing and engine, transmission, etc… break-in.
– Never used in rally.
– Compliant with Group A-5323 homologation.

BODYSHELL :
– Roll cage (Extension 17-11 VO of April 1, 1988). Material 25CD4S
– Full welded body.

ENGINE:
– Completely rebuilt.
– Competition balanced by Dynamequil.
– Wiseco pistons, 91.5 mm bore, forged from 2618 aluminum.
– ARP studs.
– Wossner connecting rods (original connecting rods also available).
– Camshafts: Stock exhaust, BD14 intake.
– Major work on the cylinder head: optimization of the ports, new guides, new valves and tappets, ground seats…
– High-capacity aluminum oil sump.
– Owens Developments Garrett T3 hybrid turbo.
– 34mm FIA restrictor or 60mm connector.
– Exhaust manifold treated with Zyrcotec (not the turbo as it is not recommended by Owens).
– OEM intercooler or larger 4×4 model.
– All sensors are new.
– New Bosch 403 injectors.
– High-performance cooling system with Spal fans.
– Stainless steel side exhaust.
– Gas temperature sensor and AFR (not active on maping as regulated).

ECU :
– Weber Marelli L6 with chips and Motorsport Developments wasted spark ignition module (but I also have the stock L1 with sparks distributor).

ELECTRICAL :
– 100% new Motorsport wiring harness with soldered connections, engine and car.
– Starter and alternator (90A) renewed with oem parts.
– Cartek electrical distribution modules.
– Stack dashboard.
– Varley Red Top 900 lithium battery.
TRANSMISSION :
– Getrag 265 5-speed gearbox with homologated synchronized gear ratios.
– Gearbox and rear differential are new (Bara Motorsport).
– Long clutch bell.
– 7.5″ rear differential, 4.4 ratio, ZF platted.
– Rigid mounting.
– AP Racing CP2486-26 clutch disc, 240 mm.
– Helix Racing clutch mechanism.

BRAKES:
– Front: ALCON 4-piston calipers and 330 mm ALCON discs. Ferodo DS3000 pads.
– Rear: ALCON 4-piston calipers and 285 mm AP Racing discs. Ferodo DS3000 pads.
– Rear pressure regulator.
– AP Racing pedal set adjustable from the dashboard.
– AP Racing master cylinders.
– Horizontal hydraulic handbrake.
– CuNi and Goodridge Dash 3 brake lines.

SUSPENSIONS :
– Suspension R-Tec. New, modified, and adjustable Öhlins front and rear shock absorbers.
– 909 front shock absorber upper mounts (ATM).
– Adjustable front and rear anti-roll bars.
– 7075 T6 aluminum front uprights and suspension arms.
– Steel ATM compression struts.
– Steel rear hub carriers.
– Front and rear suspensions on rod ends.

STEERING :
– Group A power steering pump.
– Steering rebuilt by Kelly Bray.
– Stiff steering column.

WHEELS :
– 10 X Braid Fullrace A Rallycross wheels, 8 x 17, ET26, steel inserts.

OTHERS :
– 60-liter ATL Saver Cell fuel tank (FIA FT3-1999) and aluminum tank container.
– Chek valve at the inlet (FIA conform).
– With fuel catch tank and dual pump Walbro.
– OMP HTE R XL seats (Valid until end of 2029).
– 6-points harnesses (Valid until end of 2029).
– Lifeline FIA 8865-2015 2.4L aluminum manual fire extinguisher.
– Lifeline ZERO 2020 aluminum electric fire suppression system.
– This vehicle has standard French registration and original Belgian documents.
– No car exchange.

Description

– Construite sur une période de 4 ans à partir d’une véritable Sierra RS Cosworth 3 portes de route (12/1986), avec une carrosserie irréprochable.
– À vendre avec seulement 600 km d’essais routiers et de rodage (moteur, transmission, etc.).
– N’a jamais couru en rallye.
– Conforme à l’homologation Groupe A-5323.

CAISSE :
– Arceau-cage (Extension 17-11 VO du 1er avril 1988). Matériau 25CD4S.
– Caisse entièrement soudée.

MOTEUR :
– Entièrement refait à neuf.
– Équilibrage compétition réalisé par Dynamequil.
– Pistons forgés Wiseco en aluminium 2618, alésage 91,5 mm.
– Goujons ARP.
– Bielles Wössner (bielles d’origine également disponibles).
– Arbres à cames : échappement d’origine, admission BD14.
– Gros travail sur la culasse : optimisation des conduits, guides neufs, soupapes et poussoirs neufs, sièges rectifiés…
– Carter d’huile en aluminium grande capacité.
– Turbo hybride Garrett T3 préparé par Owens Developments.
– Bride FIA de 34 mm ou raccord de 60 mm.
– Collecteur d’échappement traité Zircotec (pas le turbo, car déconseillé par Owens).
– Échangeur (intercooler) d’origine ou modèle 4×4 plus grand.
– Tous les capteurs sont neufs.
– Injecteurs Bosch 403 neufs.
– Système de refroidissement haute performance avec ventilateurs Spal.
– Échappement latéral en acier inoxydable.
– Sonde de température des gaz d’échappement (EGT) et sonde AFR (non actives sur la cartographie conformément à la réglementation).

GESTION ÉLECTRONIQUE (ECU) :
– Boîtier Weber Marelli L6 avec puces et module d’allumage à étincelle p

Contact/React

Beware of scams or fraud e-mails! For your own safety: please read this message before continuing.

Poster

MY Gallery

Member Since: 23-06-2022

See All listings of MY Gallery